Your shopping cart is currently empty.
Military Radios
Surplus and Collectible Military Radios, Transceivers, Receivers, Commercial Radios, Amateur Radios and more! Harris, Collins, Transworld, Racal, Watkins Johnson, Rohde & Schwarz, Tadiran, Grintek, ITT, Mackay, Cubic, Motorola, and much more.
-
Aircraft VHF Transceiver Rockwell Collins VHF-20Aircraft VHF Transceiver Rockwell Collins VHF-20,Price: $165.00 -
Canadian Marconi CMC VLF Receiver R-5093A / ARN-512(V) 5826-21-905-4254Canadian Marconi CMC VLF Receiver R-5093A / ARN-512(V) 5826-21-905-4254,Price: $185.00 -
Chinese BWT 133 radio system 1.6 to 29.999MHz modes LSB/USB/UCW/LCW/AM with 100Watt amp tuner and much moreChinese BWT 133 radio system 1.6 to 29.999MHz modes LSB/USB/UCW/LCW/AM with 100Watt amp tuner and much more, BWT 133 transceiver, (the transceiver covers 1.6 to 29.999MHz modes LSB/USB/UCW/LCW/AM with power output of 2-3 watts and 13-15 watts from built in manual Tuner), requires 24 VDC supply voltage. The TCP 701 HF 100 watt amplifier (takes drive from the BWT 133 via position #12 on the antenna coarse loading and covers the frequency range of 1.6 MHz to 30 MHz all modes) and the matching ATU (designed based on the Icom AT 180 with expanded impedance range and capable of much more power handling) does the rest. The ATU handles both end feed and coax output. The system is almost fully automatic when used as a fixed base, as all that is required is, select tune, enter frequency, push the tune button and hold down until tune light to goes out, and then switch to you mode of operation and go. System comes with mounting tray for R/T all interconnection cables including the amplifier to ATU cable (10 meter length). The only cable you need to make up is the coax cable from the Amplifier to ATU and we supply the BNC connectors, you supply the RG 58 (we really do not know how long a cable set you will require). This system is set up for fixed base operation at 100 watts plus or man pack configuration at 3 watts low power and 13 watts high power modes. With the R/T tray in place one only has to undo 2 latches and remove the R/T snap on the battery box and go man Pac configuration. The system comes with the following extra accessories included in the package price:
3 meter rod antenna and matching swivel base for R/T, new battery box empty, handset, wire antenna 22 meter sloper type, night light for night operations canvas carry bag with shoulder straps for man pac operations.
Everything below is extra, please send request to Scott for availability and additional charges:
What is not included in the above package that you must provide. Power source, 22 to 28 VDC at 20 amps, Batteries for battery box, RG58 coax for feed for the ATU, counterpoise wires for sloper antenna, and throw down wire for man pac operation. We can provide everything listed for an additional price.
Other options that can be provided but are not included are headset (both ears with boom mic and PTT switch), hand key for CW operation, and 44 meter doublet antenna. We can provide a suitable aftermarket power supply 110 VAC source and can make up necessary cables as required.
Price: $2,450.00 -
Chinese HF Manpack Radio TBR-133 1.6-30MHz 15W HF/SSB (AM,CW,LSB, Data) with new un-used accessories. VERY rare, and this is a very neat radio to operate.Chinese HF Manpack Radio BWT-133 1.6-30MHz 15W HF/SSB (AM,CW,LSB, Data) with new un-used accessories. VERY rare, and this is a very neat radio to operate., The pictures don't do it justice. Comes with un-used battery box (cells have been removed), un-used handset, un-used boom mic headset, un-used antenna and bag. The antenna side mount can easily be removed from the radio. The sidemount has an adjustable angle. Runs on 24VDC, all solid state.Price: $1,150.00 -
Collins Radio Control Head 313N-1Collins Radio Control Head 313N-1,Price: $32.00 -
Complete 20-3000MHz Monitoring System DRS Nanoceptor Watkins Johnson SI-8614-3Complete 20-3000MHz Monitoring System DRS Nanoceptor Watkins Johnson SI-8614-3, Complete 20-3000MHz Monitoring Receiver System, SIGINT, etc. Current model DRS (Watkins Johnson) SI-8614-3 Nanoceptor subminiature Receiver. VHF/UHF with 100hz resolution. Has 6 hardware built-in filters (see table in pictures) and built-in hardware AM, FM, Log, and Pulse detectors. Has a headphones jack. This is a turnkey system that includes a General Dynamics GD8200 laptop with an i7 processor and Windows 10 pro installed. The system also includes the Receiver control software installed and a RTL-SDR receiver which is connected to the 70MHz IF out to be used as a panadaptor and demodulator using installed SDR# software. Comes with everything except an antenna. This is an extremely nice and very high end spec. modern receiver.Price: $2,650.00 -
DRS SI-9479 Pico ProcessorDRS SI-9479 Pico Processor,Price: $2,250.00 -
DRS SI-9479A Pico ProcessorDRS SI-9479A Pico Processor,Price: $2,650.00 -
DRS Technologies Watkins Johnson SI-8614-3 Nanoceptor VHF/UHF 20-3000MHz Receiver with BW8 Options Perfect CondDRS Technologies Watkins Johnson SI-8614-3 Nanoceptor VHF/UHF 20-3000MHz Receiver with BW8 Options Perfect Cond, With COM port connection cable.
The SI-8614-3 Nanoceptor TM is a high-performance subminiature surveillance receiver that tunes from 20 to 3000 MHz. The primary application of this receiver is to function as a tuner providing a 70 MHz Switched IF Output suitable for driving external A/D converters. The extremely small size and low power consumption make the unit ideal for portable applications where size, weight and power reduction are critical.
Frequency tuning covers the range from less than 2 MHz
to 3000 MHz in 100-Hz steps. Performance is optimized
with RF preselection for the range of 20 to 3000 MHz.
Tuning can be commanded from any frequency to any
other frequency in the range in less than 11 milliseconds
maximum (8 ms typical). Tuning between frequencies
separated by less than 1 MHz typically requires less than
3 ms in sweep mode operation.
The IF bandpass filtering provides many options to support
external A/D processing and anti-aliasing requirements.
Filters may be cascaded to provide the required shape
factor and selectivity. Up to nine IF bandwidths can
be provided depending on the filters selected and the
selectivity requirement. Contact factory with IF bandwidth
requirements.
The receiver also provides AM, FM, LOG and Pulse
demodulation through all selected IF bandwidths. The
AM demodulation provides lower audio and video output
levels than the standard SI-8614 and SI-8614-1 receivers as
noted in the specification table. For this reason, external
amplification may be required to drive audio and video
devices for AM.
Bandwidth Set 8 (8614-3/BW8)
Typical Typical 1-dB Shape
Nominal 3-dB 1-dB Minimum Factor Sensitivity*
Bandwidth Bandwidth Bandwidth Bandwidth 60:3 dB (dBm)
10 kHz 10 kHz 3:1 -102
30 kHz 30 kHz 5:1 (50:3 dB) -97
6 MHz 6 MHz 5 MHz 2:1 -74
12 MHz 12 MHz 10 MHz 1.4:1 -72
25 MHz 25 MHz 3:1 -68
40 MHz 50 MHz 3:1 -65
Price: $2,250.00 -
E.H. Scott Model RCH Navy HF ReceiverE.H. Scott Model RCH Navy HF Receiver, Was working a few years ago, but hasn't been powered on since, may need to be brought up to power slowly. Comes with a metal cabinet which was stored separately outside, so the cabinet is rusted and needs to be refinished.Price: $325.00 -
Harris TF-117A MTS Manual Test Station for PRC-117A complete test set with a full TF-117A test fixtureHarris TF-117A MTS Manual Test Station for PRC-117A complete test set with a full TF-117A test fixture, with power supply, extension cards etc. Extremely Rare, no manual included un-used.Price: $1,350.00 -
ITT Mackay MSR-8000 Military HF Transceiver 125 Watts 1.6-30MHz USB, LSB, AM, CW, FSK. 12VDC - Quality Level 2 (Tested On-Air, Complete & Working)ITT Mackay MSR-8000 Military HF Transceiver, Quality Level 2 (Tested On-Air, Complete & Working)
1.6 MHz to 30 MHz in steps of 100 Hz,working modes are AM, USB, LSB, CW and FSK.
125 Watts output power.
The radio has 10 programmed memory channels and manual frequency selection.The memory channels are set separately for receive and transmit.
Level 2 Equipment
This level requires equipment to transmit at full power and receive. However not through out its entire frequency range. There may be gaps where there is no output, there many be hum in the audio. There may be distortion in the audio. The equipment however will be on frequency and the synthizer will be calibrated and reference set within OEM spec. You can expect a good final amplifier and good synthizer. It is expected further repair will be required. Transmitter gain modulation adjustments, or receiver adjustments have been set. This level, is an excellent entry point for a person who wants to learn the MSR 8000. Moderate skill level and general maintenance could result in a level 1 radio.
Picture is representative, may not be actual radio.
Price: $750.00 -
ITT Mackay MSR-8000 Military HF Transceiver 125 Watts 1.6-30MHz USB, LSB, AM, CW, FSK. 12VDC - Quality Level 3 (Complete but non-operational)ITT Mackay MSR-8000 Military HF Transceiver, Quality Level 3 (Complete but non-operational). Can be repaired or used as a parts unit.
1.6 MHz to 30 MHz in steps of 100 Hz,working modes are AM, USB, LSB, CW and FSK.
125 Watts output power.
The radio has 10 programmed memory channels and manual frequency selection.The memory channels are set separately for receive and transmit.
Level 3 Equipment
This level requires no testing. This level is a parts unit. You will receive all boards and metal parts as they where supplied to us. The unit may not even turn on without further repair, cleaning contacts connectors etc. However with enough effort and parts the equipment could become a working unit.
Picture is representative, may not be actual radio.Price: $495.00 -
Martek MRR5-WP 1.6-30MHz HF Receiver LSB, USB,CW, AM, very similar to Racal Syncal without TXMartek MRR5-WP 1.6-30MHz HF Receiver LSB, USB,CW, AM, very similar to Racal Syncal without TX,Price: $350.00 -
Martek MRR5-WP/AL 1.6-30MHz HF Receiver LSB, USB,CW, AM, very similar to Racal Syncal without TX, Has N antenna connectorMartek MRR5-WP/AL 1.6-30MHz HF Receiver LSB, USB,CW, AM, very similar to Racal Syncal without TX, Has N antenna connector,Price: $350.00 -
Microdyne 1100-AR(5) VLF-HF Telemetry Receiver 10kHz-10MHzMicrodyne 1100-AR(5) VLF-HF Telemetry Receiver 10kHz-10MHz, with 1185-T(D) RF Tuner, 1144-D(A) Intermediate/wideband FM Demodulator, 1120 VI(0.1-3.5MHz) Second IF, and power cablePrice: $525.00 -
Microdyne 1400 MRA Telemetry Receiver with very desirable FM Demodulator, 3 IF Filters, and 105-170MHz TunerMicrodyne 1400 MRA Telemetry Receiver with very desirable FM Demodulator, 3 IF Filters, and 105-170MHz Tuner, This is a beautiful receiver in prefect working condition. It has the rare and desirable plug-ins. 1444-D FM Demodulator, 1420-I IF Filter Amplifier with 3 filters installed,100kHz, 3.3MHz, and 6MHz. And it has the very difficult to find 1411-VT RF Tuner 105-170MHz. Comes with power cord.Price: $685.00 -
Microdyne 1400 MRA Telemetry Receiver with very desirable FM Demodulator, 4 IF Filters, and 105-170MHz TunerMicrodyne 1400 MRA Telemetry Receiver with very desirable FM Demodulator, 4 IF Filters, and 105-170MHz Tuner, This is a beautiful receiver in prefect working condition. It has the rare and desirable plug-ins. 1444-D FM Demodulator, 1420-I IF Filter Amplifier with 4 filters installed,100kHz, 150kHz, 225kHz and 300kHz. And it has the very difficult to find 1411-VT RF Tuner 105-170MHz. Comes with power cord.Price: $875.00 -
Microdyne IF filter amplifier 1420-I series 100KHz bandwidth for model 1400-MRA telemetry receiverMicrodyne IF filter amplifier 1420-I series 100KHz bandwidth for model 1400-MRA telemetry receiver,Price: $100.00 -
Microdyne PM demodulator 1451-D for model 1400-MRA telemetry receiverMicrodyne PM demodulator 1451-D for model 1400-MRA telemetry receiver,Price: $120.00
